Current/voltage measuring modules

• Заказные данные
  (3)
• Информационные материалы

  Информационные материалы

  In addition to measuring the load currents, the current/voltage measuring module UM can also be used to measure phase voltages in a single or three-phase system.

  There are three different versions:

  • 2.4 A to 25 A current/voltage measuring module
  • 10 A to 100 A current/voltage measuring module
  • 20 A to 200 A current/voltage measuring module

  Особенности

  • Current measurement on a feeder
  • Current ranges between 2.4 A and 200 A
  • Measurement of phase voltages up to 400 V (e.g. UL1) or phase-to-phase voltages up to 690 V (e.g. UL1-UL2)
  • Measurements in three-phase systems or single-phase AC systems

  Технические данные

  product brand name			SIPLUS
  Product designation			HCS300I I/U detection module I=2.4-25A	HCS300I I/U detection module I=10-100A	HCS300I I/U detection module I=20-200A
  General technical data:
  Equipment marking acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750			F
  Equipment marking acc. to DIN EN 61346-2			F
  Communication:
  Design of the interface			system interface
  Supply voltage:
  Design of the power supply			Supply via base unit
  Ambient conditions:
  Protection class IP			IP20
  Shock resistance acc. to IEC 60068-2-27			15g / 11 ms
  Conducted interference
  ● due to burst acc. to IEC 61000-4-4			2 kV power supply lines / 1 kV signal lines
  ● due to surge acc. to IEC 61000-4-5			on power supply lines: 1 kV symmetric, 2 kV asymmetric; on signal lines > 30 m unshielded: 1 kV symmetric, 2 kV asymmetric, > 30 m shielded: 2 kV asymmetric
  ● due to high-frequency radiation acc. to IEC 61000-4-6			10 V (0.15 ... 80 MHz)
  Electrostatic discharge acc. to IEC 61000-4-2			6 kV contact discharge / 8 kV air discharge
  Field-bound parasitic coupling acc. to IEC 61000-4-3			10 V/m (80 ... 1000 MHz), 3 V/m (1.4 ... 2.0 GHz), 1 V/m (2.0 ... 2.7 GHz)
  EMC emitted interference			IEC61131: Class A; conducted and radiated: DIN EN 55011/CISPR11 (corresponds to degree of severity A)
  Installation altitude at height above sea level maximum		m	2 000
  Ambient temperature
  ● during storage		°C	-40 ... +80
  ● during operation		°C	-25 ... +60
  ● during transport		°C	-40 ... +80
  Air pressure
  ● during operation		hPa	795 ... 1 080
  ● during storage		hPa	660 ... 1 080
  Connections:
  Type of electrical connection for auxiliary and control current circuit			screw-type terminals
  Installation/ mounting/ dimensions:
  Mounting position			any
  Mounting type			Snap-mounting on a TH 35 mm standard rail compliant with IEC 60715 or screw-mounted using additional push-in lug
  Width		mm	45	55	120
  Height		mm	85	94	95
  Depth		mm	71	97	145
  Certificates/ approvals:
  Certificate of suitability			CE, cULus, C-Tick (RCM)