Basic devices

• Заказные данные
  (1)
• Информационные материалы

  Информационные материалы

  The basic unit handles the central functions of the SIPLUS HCS300I heating controller and communicates with the higher-level automation system.

  Особенности

  • Three digital relay outputs for switching ohmic loads
  • Communication with the higher-level automation system over PROFIBUS DP
  • Local control of the system
  • Four digital inputs for supplying external signals

  Технические данные

  Order number			6BK1700-3BA20-0AA0
  product brand name			SIPLUS
  Product designation			HCS300I basic device
  Inputs/ Outputs:
  Type of voltage of output voltages			DC
  Output voltage		V	24 ... 125
  Property of the output Short-circuit proof			No
  Output current at digital output for signal <1> maximum		A	2
  Galvanic isolation between the outputs and system interface			Yes
  General technical data:
  Equipment marking acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750			F
  Equipment marking acc. to DIN EN 61346-2			F
  Number of status displays			3
  Display version as status display by LED			device: 4 states, BUS: 2 states, GEN.FAULT: 2 states
  Communication:
  Design of the interface			PROFIBUS DP
  Ambient conditions:
  Protection class IP			IP20
  Shock resistance acc. to IEC 60068-2-27			15g / 11 ms
  Conducted interference
  ● due to burst acc. to IEC 61000-4-4			2 kV power supply lines / 1 kV signal lines
  ● due to surge acc. to IEC 61000-4-5			on supply cables: 1 kV symmetrical, 2 kV asymmetrical; on signal cables > 30 m unshielded: 1 kV symmetrical, 2 kV asymmetrical, > 30 m unshielded: 2 kV asymmetrical
  ● due to high-frequency radiation acc. to IEC 61000-4-6			10 V (0.15 ... 80 MHz)
  Electrostatic discharge acc. to IEC 61000-4-2			6 kV contact discharge / 8 kV air discharge
  Field-bound parasitic coupling acc. to IEC 61000-4-3			10 V/m (80 ... 1000 MHz), 3 V/m (1.4 ... 2.0 GHz), 1 V/m (2.0 ... 2.7 GHz)
  EMC emitted interference			IEC61131: Class A; conducted and radiated: DIN EN 55011/CISPR11 (corresponds to degree of severity A)
  Installation altitude at height above sea level maximum		m	2 000
  Ambient temperature
  ● during storage		°C	-40 ... +80
  ● during operation		°C	-25 ... +60
  ● during transport		°C	-40 ... +80
  Air pressure
  ● during operation		hPa	795 ... 1 080
  ● during storage		hPa	660 ... 1 080
  Connections:
  Type of switching output			monostable relays
  Type of electrical connection for auxiliary and control current circuit			screw-type terminals
  Installation/ mounting/ dimensions:
  Mounting position			any
  Mounting type			Snap-mounting on a TH 35 mm standard rail compliant with IEC 60715 or screw-mounted using additional push-in lug
  Width		mm	45
  Height		mm	106
  Depth		mm	115
  Certificates/ approvals:
  Certificate of suitability			CE, cULus, C-Tick (RCM)