Digital modules

• Заказные данные
  (1)
• Аксессуары
  (2)
• Информационные материалы

  Информационные материалы

  The digital modules expand the SIPLUS HCS300I heater controller with additional digital outputs via which solid-state relays (SSR) or contactors are switched.

  Особенности

  • Six digital 24 V DC outputs in the form of "high-side" switches
  • Up to four digital modules can be connected to a basic unit
  • Up to 24 digital output signals (with four digital modules) can be switched to loads of up to 500 mA
  • Control of the digital outputs by means of a higher-level automation system that communicates with the SIPLUS HCS300I basic unit over the PROFIBUS DP
  • Simple connection of solid-state relays (SSR) possible using pre-assembled cable

  Технические данные

  Order number			6BK1700-2BA80-0AA0
  product brand name			SIPLUS
  Inputs/ Outputs:
  Type of voltage of output voltages			DC
  Output voltage		V	19.4 ... 28.8
  Output voltage at DC rated value		V	24
  Property of the output Short-circuit proof			✓
  Output current at digital output for signal <1> maximum		mA	500
  Switching frequency of the outputs with resistive load maximum		Hz	50; with a 50 Hz digital module; at maximum configuration min. 20 Hz
  Galvanic isolation between the outputs and system interface			—
  General technical data:
  Equipment marking acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750			F
  Equipment marking acc. to DIN EN 61346-2			F
  Number of status displays			1
  Display version as status display by LED			continuous light: ready, flashing light: no connection to basic device
  Communication:
  Design of the interface			system interface
  Supply voltage:
  Design of the power supply			Supply via base unit
  Ambient conditions:
  Protection class IP			IP20
  Shock resistance acc. to IEC 60068-2-27			15g / 11 ms
  Conducted interference
  ● due to burst acc. to IEC 61000-4-4			2 kV power supply lines / 1 kV signal lines
  ● due to surge acc. to IEC 61000-4-5			on power supply lines: 1 kV symmetric, 2 kV asymmetric, on signal lines > 30 m unshielded: 1 kV symmetric, 2 kV asymmetric, > 30 m shielded: 2 kV asymmetric
  ● due to high-frequency radiation acc. to IEC 61000-4-6			10 V (0.15 ... 80 MHz)
  Electrostatic discharge acc. to IEC 61000-4-2			6 kV contact discharge / 8 kV air discharge
  Field-bound parasitic coupling acc. to IEC 61000-4-3			10 V/m (80 ... 1000 MHz), 3 V/m (1.4 ... 2.0 GHz), 1 V/m (2.0 ... 2.7 GHz)
  EMC emitted interference			IEC61131: Class A; conducted and radiated: DIN EN 55011/CISPR11 (corresponds to degree of severity A)
  Installation altitude at height above sea level maximum		m	2 000
  Ambient temperature
  ● during storage		°C	-40 ... +80
  ● during operation		°C	-25 ... +60
  ● during transport		°C	-40 ... +80
  Air pressure
  ● during operation		hPa	795 ... 1 080
  ● during storage		hPa	660 ... 1 080
  Connections:
  Product function Solid-state relay control via prefabricated connection cable			✓
  Type of switching output			semiconductor output (high side switch)
  Type of electrical connection for auxiliary and control current circuit			screw-type terminals
  Installation/ mounting/ dimensions:
  Mounting position			any
  Mounting type			Snap-mounting on a TH 35 mm standard rail compliant with IEC 60715 or screw-mounted using additional push-in lug
  Width		mm	22.5
  Height		mm	92
  Depth		mm	115
  Certificates/ approvals:
  Certificate of suitability			CE, cULus, C-Tick (RCM)