Current measuring modules

• Заказные данные
  (3)
• Информационные материалы

  Информационные материалы

  The IM current measuring module measures the load currents of the heating or cooling devices, and delivers the values to the basic unit. The module must be selected according to the expected maximum current of all connected loads.

  There are three different versions:

  • 2.4 A to 25 A current measuring module
  • 10 A to 100 A current measuring module
  • 20 A to 200 A current measuring module

  Особенности

  • Current measurement on a feeder
  • Current ranges between 2.4 A and 200 A

  Технические данные

  Order number			6BK1700-3BA30-0AA0	6BK1700-3BA40-0AA0	6BK1700-3BA50-0AA0
  product brand name			SIPLUS
  Product designation			HCS300I current detection module 2.4-25A	HCS300I current detection module 10-100A	HCS300I current detection module 20-200A
  General technical data:
  Equipment marking acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750			F
  Equipment marking acc. to DIN EN 61346-2			F
  Communication:
  Design of the interface			system interface
  Supply voltage:
  Design of the power supply			Supply via base unit
  Ambient conditions:
  Protection class IP			IP20
  Shock resistance acc. to IEC 60068-2-27			15g / 11 ms
  Conducted interference
  ● due to burst acc. to IEC 61000-4-4			2 kV power supply lines / 1 kV signal lines
  ● due to surge acc. to IEC 61000-4-5			on power supply lines: 1 kV symmetric, 2 kV asymmetric; on signal lines > 30 m unshielded: 1 kV symmetric, 2 kV asymmetric, > 30 m shielded: 2 kV asymmetric
  ● due to high-frequency radiation acc. to IEC 61000-4-6			10 V (0.15 ... 80 MHz)
  Electrostatic discharge acc. to IEC 61000-4-2			6 kV contact discharge / 8 kV air discharge
  Field-bound parasitic coupling acc. to IEC 61000-4-3			10 V/m (80 ... 1000 MHz), 3 V/m (1.4 ... 2.0 GHz), 1 V/m (2.0 ... 2.7 GHz)
  EMC emitted interference			IEC61131: Class A; conducted and radiated: DIN EN 55011/CISPR11 (corresponds to degree of severity A)
  Installation altitude at height above sea level maximum		m	2 000
  Ambient temperature
  ● during storage		°C	-40 ... +80
  ● during operation		°C	-25 ... +60
  ● during transport		°C	-40 ... +80
  Air pressure
  ● during operation		hPa	795 ... 1 080
  ● during storage		hPa	660 ... 1 080
  Installation/ mounting/ dimensions:
  Mounting position			any
  Mounting type			Snap-mounting on a TH 35 mm standard rail compliant with IEC 60715 or screw-mounted using additional push-in lug
  Width		mm	45	55	120
  Height		mm	84	94	95
  Depth		mm	45	72	145
  Certificates/ approvals:
  Certificate of suitability			CE, cULus, C-Tick (RCM)