CPU 1513F-1 PN

• Заказные данные
  (1)
• Аксессуары
  (30)
• Информационные материалы

  Информационные материалы

  • The CPU for standard and fail-safe applications with medium/high requirements for program/data storage in the SIPLUS S7-1500 controller product range
  • High processing speed for binary and floating-point arithmetic
  • Used as central controller in production lines with central and distributed I/O
  • Supports PROFIsafe in centralized and distributed configurations 
  • PROFINET IO IRT interface with 2-port switch
  • PROFINET IO Controller for operating distributed I/O on PROFINET
  • PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET I/O controller
  • Isochronous mode

  Note:

  SIMATIC memory card required for operation of the CPU.

  SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the corresponding standard products. SIPLUS extreme-specific information was added.

  Область применения

  The CPU 1513F-1 PN is the CPU with a medium to large program and data memory for standard and fail-safe applications that also contain distributed automation structures alongside central I/O. It can be used as a PROFINET IO Controller or as distributed intelligence (PROFINET I-Device). The integrated PROFINET IO IRT interface is designed as 2-port switch so that a linear topology can be set up in the system. In addition, the CPU offers comprehensive control functionalities as well as the ability to connect drives via standardized PLC-open blocks.

  Дизайн

  The CPU 1513F-1 PN has:

  • a powerful processor:
    The CPU achieves a command execution time as low as 40 ns per binary command.
  • extensive RAM:
    450 KB for program, 1.5 MB for data
  • SIMATIC Memory Cards as load memory;
    permit additional functions such as Datalog and Archive Flexible
  • Expansion capability:
    single-tier configuration with max. 32 modules (CPU + 31 modules)
  • Display with functions for the
    • Display of overview information such as station name, higher level designation, location designation, etc.
    • Display of diagnostic information
    • Display of module information
    • Display of display settings
    • Setting of IP addresses
    • Setting of date and time
    • Selection of the operating mode
    • Resetting of the CPU to factory settings
    • Disabling/enabling of the display
    • Enabling of protection levels
    • Display of safety mode, overall signature and date of the last download with signature change.
  • PROFINET IO IRT interface for connecting distributed I/O via PROFINET
  • Supports PROFIsafe in centralized and distributed configuration

  Функции

  • Performance
    • Faster command processing, depending on the CPU type, language extensions and new data types
    • Even shorter response times of the CPUs due to considerably faster backplane bus
    • Powerful network connection:
      each CPU is equipped with PROFINET IO IRT (2-port switch) as standard interface.
  • Integrated technology
    • Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen)
    • Support of speed-controlled and positioning axes as well as external encoders
    • Trace functions for all CPU variables, both for diagnostics in real time as well as for sporadic error detection
    • Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality
  • Security Integrated
    • Password-based know-how protection against unauthorized reading and modification of program blocks
    • Copy protection for tying individual blocks to the serial number of the SIMATIC Memory Card: The block can only run if the configured memory card is inserted into the CPU.
    • 4-level authorization concept:
      Communication to the HMI devices can also be restricted.
    • Manipulation protection:
      The controller recognizes changed or unauthorized transmissions of the engineering data.
  • Design and handling
    • Display of overview information:
      E.g. station name, plant identifier, location designation, etc., diagnostic information, module information, display settings.
    • Possible operations on the display:
      set addresses, set date and time, select operating mode of CPU, reset CPU to factory settings, disable/enable display, activate protection levels.
  • Integrated system diagnostics
    • System diagnostics information is displayed consistently and in plain text in the display, TIA Portal, HMI devices and Web server, even for messages from the drives, and updated even if the CPU is in STOP mode.
    • Integrated in the firmware of the CPU, no special configuration is required
  • SIMATIC Memory Card (required for operation of the CPU)
    • Used as plug-in load memory or for updating the firmware.
    • Additionally for storing additional documents or csv files (for recipes and archives)
    • Creation of data blocks for storage/reading of data via SFCs of the user program
  • Datalog (archives) and recipes
    • Storage of csv files for recipes and archives on the SIMATIC Memory Card;
      easy access to plant-relevant operating data using Office tools or via a Web server
    • Easy access to configuration data of the machine by means of a Web browser or SD card reader (two-way data exchange from and to the controller)
  • Programming of the standard program section
    • Programming with STEP 7 V12 SP1
  • Programming of the failsafe program section
    • Programming of the safety-related program section with the option package "STEP 7 Safety Advanced". STEP 7 Safety Advanced V12 can run under SIMATIC STEP 7 Professional V12 SP1.

  Технические данные

  Order number		6AG1513-1FL01-2AB0
  		SIPLUS S7-1500 CPU 1513F-1 PN
  General information
  Product type designation		CPU 1513F-1 PN
  Engineering with
  ● STEP 7 TIA Portal configurable/integrated as of version		V13 SP1 Update 4
  Supply voltage
  Type of supply voltage		24 V DC
  Power loss
  Power loss, typ.		5.7 W
  Memory
  Work memory
  ● integrated (for program)		450 kbyte
  ● integrated (for data)		1.5 Mbyte
  Load memory
  ● Plug-in (SIMATIC Memory Card), max.		32 Gbyte
  CPU processing times
  for bit operations, typ.		40 ns
  for word operations, typ.		48 ns
  for fixed point arithmetic, typ.		64 ns
  for floating point arithmetic, typ.		256 ns
  Counters, timers and their retentivity
  S7 counter
  ● Number		2 048
  IEC counter
  ● Number		Any (only limited by the main memory)
  S7 times
  ● Number		2 048
  IEC timer
  ● Number		Any (only limited by the main memory)
  Data areas and their retentivity
  Flag
  ● Number, max.		16 kbyte
  Address area
  I/O address area
  ● Inputs		32 kbyte; All inputs are in the process image
  ● Outputs		32 kbyte; All outputs are in the process image
  Time of day
  Clock
  ● Type		Hardware clock
  1. Interface
  Interface types
  ● Number of ports		2
  ● integrated switch		Yes
  ● RJ 45 (Ethernet)		Yes; X1
  Functionality
  ● PROFINET IO Controller		Yes
  ● PROFINET IO Device		Yes
  ● SIMATIC communication		Yes
  ● Open IE communication		Yes
  ● Web server		Yes
  ● Media redundancy		Yes
  Protocols
  Supports protocol for PROFINET IO		Yes
  PROFIsafe		Yes
  Number of connections
  ● Number of connections, max.		128; via integrated interfaces of the CPU and connected CPs / CMs
  PROFINET IO Controller
  Services
  — Number of connectable IO Devices, max.		128; In total, up to 256 distributed I/O devices can be connected via PROFIBUS or PROFINET
  — Of which IO devices with IRT, max.		64
  — Number of connectable IO Devices for RT, max.		128
  Isochronous mode
  Isochronous operation (application synchronized up to terminal)		Yes; With minimum OB 6x cycle of 500 µs
  Supported technology objects
  Motion Control		Yes
  ● Speed-controlled axis
  — Number of speed-controlled axes, max.		6; Requirement: There must be no other motion technology objects created
  ● Positioning axis
  — Number of positioning axes, max.		6; Requirement: There must be no other motion technology objects created
  ● Synchronized axes (relative gear synchronization)
  — Number of axes, max.		3; Requirement: There must be no other motion technology objects created
  ● External encoders
  — Number of external encoders, max.		6; Requirement: There must be no other motion technology objects created
  Controller
  ● PID_Compact		Yes; Universal PID controller with integrated optimization
  ● PID_3Step		Yes; PID controller with integrated optimization for valves
  ● PID-Temp		Yes; PID controller with integrated optimization for temperature
  Counting and measuring
  ● High-speed counter		Yes
  Ambient conditions
  Ambient temperature during operation
  ● horizontal installation, min.		-25 °C; = Tmin; startup @ -25 °C; startup display @ -20 °C
  ● horizontal installation, max.		60 °C; Display: 50 °C, at an operating temperature of typically 50 °C, the display is switched off
  ● vertical installation, min.		-25 °C; = Tmin; startup @ -25 °C; startup display @ -20 °C
  ● vertical installation, max.		40 °C; Display: 40 °C, at an operating temperature of typically 40 °C, the display is switched off
  Extended ambient conditions
  ● relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
  Relative humidity
  — With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
  Resistance
  — against biologically active substances / conformity with EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
  — against chemically active substances / conformity with EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
  — against mechanically active substances / conformity with EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
  Configuration
  Programming
  Programming language
  — LAD		Yes; incl. failsafe
  — FBD		Yes; incl. failsafe
  — STL		Yes
  — SCL		Yes
  — GRAPH		Yes
  Know-how protection
  ● User program protection/password protection		Yes
  ● Copy protection		Yes
  ● Block protection		Yes
  Access protection
  ● Password for display		Yes
  ● Protection level: Write protection		Yes; Specific write protection both for Standard and for Failsafe
  ● Protection level: Read/write protection		Yes
  ● Protection level: Complete protection		Yes
  Dimensions
  Width		35 mm
  Height		147 mm
  Depth		129 mm
  Weights
  Weight, approx.		430 g
  Other
  Note:		At temperatures below 0 °C legibility may be restricted and representation of dynamic contents may be slower

  
  

  Дальнейшая информация

  Further information and downloads

  Safety Integrated

  Information on functional safety, also for S7-1500F Controllers:

  http://www.siemens.com/safety-integrated

  Manuals

  The SIMATIC S7-1500 manuals can be downloaded free of charge from the Internet (SIMATIC Customer Support, http://www.siemens.com/automation/support).

  General information

  http://www.siemens.com/S7-1500

  SIMATIC Selection Tool

  http://www.siemens.com/tia-selection-tool

  Brochures

  Information material for downloading can be found on the Internet:

  http://www.siemens.com/simatic/printmaterial