F digital output module

• Заказные данные
  (1)
• Аксессуары
  (8)
• Информационные материалы

  Информационные материалы

  Digital fail-safe digital output module:
  F-DQ 8x24VDC 2A PPM PROFISAFE

  Important properties:

  • 8-channel digital fail-safe output module for ET 200MP/S7-1500
  • Fail-safe 2-channel activation (parameterizable PM/PP switching) of actuators
  • Actuators can be controlled up to 2 A
  • Certified up to SIL 3 (IEC 61508), PL e (ISO 13849)
  • LED display for error, operation, supply voltage and status
  • Clear module labeling
    • Plain text identification of the module type
    • Complete Article No.
    • 2D matrix code (article and serial number)
    • Connection diagram
    • Hardware and firmware version
  • Optional labeling accessories
    • Labeling sheets, yellow
  • The module supports PROFIsafe in both PROFIBUS and PROFINET configurations.
  • Can be used with all fail-safe SIMATIC S7-1500 F-CPUs in the central configuration, as well as ET 200MP distributed I/O with all other SIMATIC S7 F-CPUs.

  Область применения

  Using fail-safe ET 200MP/S7-1500 modules makes it possible to implement safety-related application requirements as an integral part of the overall automation. The safety functions required for fail-safe operation are integrated in the modules. Communication with the fail-safe SIMATIC S7 CPUs is performed by means of PROFIsafe.

  The modules can be operated both in centralized and distributed configurations.

  Технические данные

  Order number		6ES7526-2BF00-0AB0
  		ET 200MP, F-DQ 8X24VDC 2A PPM
  General information
  Product type designation		F-DQ 8x24VDC/2A PPM
  Product function
  ● I&M data		Yes; I&M0 to I&M3
  Engineering with
  ● STEP 7 TIA Portal configurable/integrated as of version		V13 SP1 with HSP0086
  Operating mode
  ● DQ		Yes
  Supply voltage
  Type of supply voltage		24 V DC
  Rated value (DC)		24 V
  Reverse polarity protection		Yes
  Digital outputs
  Number of digital outputs		8
  Current-sinking		Yes
  Current-sourcing		Yes
  Short-circuit protection		Yes
  Open-circuit detection		Yes
  Overload protection		Yes
  Limitation of inductive shutdown voltage to		PM-switching: -24 V + (-47 V), PP-switching: -24 V
  Switching capacity of the outputs
  ● with resistive load, max.		2 A
  ● on lamp load, max.		10 W
  Load resistance range
  ● lower limit		12 Ω
  ● upper limit		2 000 Ω
  Output voltage
  ● Type of output voltage		DC
  ● for signal "1", min.		24 V; L+ (-0.5 V)
  Output current
  ● for signal "1" rated value		2 A
  ● for signal "0" residual current, max.		0.5 mA; Current-sourcing, or current sourcing and sinking switches individually, current sinking: max. 1 mA
  Switching frequency
  ● with resistive load, max.		30 Hz
  ● with inductive load, max.		0.1 Hz
  ● on lamp load, max.		10 Hz
  Total current of the outputs
  ● Current per channel, max.		2 A
  Total current of the outputs (per module)
  horizontal installation
  — up to 40 °C, max.		16 A
  — up to 60 °C, max.		8 A
  vertical installation
  — up to 40 °C, max.		8 A
  Cable length
  ● shielded, max.		1 000 m
  ● unshielded, max.		500 m
  Interrupts/diagnostics/status information
  Diagnostics function		Yes
  Substitute values connectable		No
  Alarms
  ● Diagnostic alarm		Yes
  Diagnostic messages
  ● Monitoring the supply voltage		Yes
  ● Wire-break		Yes
  ● Short-circuit		Yes
  ● Group error		Yes
  Diagnostics indication LED
  ● RUN LED		Yes; Green LED
  ● ERROR LED		Yes; Red LED
  ● Monitoring of the supply voltage (PWR-LED)		Yes
  ● Channel status display		Yes; Green LED
  ● for channel diagnostics		Yes; Red LED
  ● for module diagnostics		Yes; Red LED
  Potential separation
  Potential separation channels
  ● between the channels and backplane bus		Yes
  Isolation
  Isolation tested with		707 V DC (type test)
  Standards, approvals, certificates
  Suitable for safety functions		Yes
  Highest safety class achievable in safety mode
  ● Performance level according to ISO 13849-1		PLe
  ● SIL acc. to IEC 61508		SIL 3
  Probability of failure (for service life of 20 years and repair time of 100 hours)
  — Low demand mode: PFDavg in accordance with SIL3		< 6.00E-05
  — High demand/continuous mode: PFH in accordance with SIL3		< 2.00E-09 1/h
  Ambient conditions
  Ambient temperature during operation
  ● horizontal installation, min.		0 °C
  ● horizontal installation, max.		60 °C
  ● vertical installation, min.		0 °C
  ● vertical installation, max.		40 °C
  Dimensions
  Width		35 mm
  Height		147 mm
  Depth		129 mm
  Weights
  Weight, approx.		300 g