F digital input module

• Заказные данные
  (1)
• Аксессуары
  (8)
• Информационные материалы

  Информационные материалы

  Fail-safe digital input module

  F-DI 16x24VDC PROFISAFE

  Important properties:

  • 16-channel fail-safe digital input module for ET 200MP/S7-1500
  • For fail-safe reading of sensor information (1 or 2 channels)
  • Provides integral discrepancy evaluation for 2-out-of-2 signals
  • 4 internal sensor supplies (incl. test function) onboard
  • Certified up to SIL 3 (IEC 61508), PL e (ISO 13849)
  • LED display for error, operation, supply voltage and status
  • Clear module labeling
    • Plain text identification of the module type
    • Complete Article No.
    • 2D matrix code (article and serial number)
    • Connection diagram
    • Hardware and firmware version
  • Optional labeling accessories
    • Labeling sheets, yellow
  • The modules support PROFIsafe in both PROFIBUS and PROFINET configurations. Can be used with all fail-safe SIMATIC S7-1500 F-CPUs in the central configuration, as well as ET 200MP distributed I/O with all other SIMATIC S7 F-CPUs.

  Область применения

  Using fail-safe ET 200MP/S7-1500 modules makes it possible to implement safety-related application requirements as an integral part of the overall automation. The safety functions required for fail-safe operation are integrated in the modules. Communication with the fail-safe SIMATIC S7 CPUs is performed by means of PROFIsafe.

  The modules can be operated both in centralized and distributed configurations.

  Технические данные

  Order number		6ES7526-1BH00-0AB0
  		ET 200MP, F-DI 16X24VDC
  General information
  Product type designation		F-DI 16x24VDC
  Product function
  ● I&M data		Yes; I&M0 to I&M3
  Engineering with
  ● STEP 7 TIA Portal configurable/integrated as of version		V13 SP1 with HSP0086
  Operating mode
  ● DI		Yes
  Supply voltage
  Type of supply voltage		24 V DC
  Rated value (DC)		24 V
  Reverse polarity protection		Yes
  Encoder supply
  Number of outputs		4
  Short-circuit protection		Yes; Electronic (response threshold 0.7 A to 1.8 A)
  24 V encoder supply
  ● 24 V		Yes; min. L+ (-1.5 V)
  ● Short-circuit protection		Yes
  ● Output current, max.		300 mA; Max. 100 mA when mounted vertically
  Digital inputs
  Number of digital inputs		16
  Source/sink input		Yes; P-reading
  Input characteristic curve in accordance with IEC 61131, type 1		Yes
  Input voltage
  ● Type of input voltage		DC
  ● Rated value (DC)		24 V
  ● for signal "0"		-30 to +5V
  ● for signal "1"		+15 to +30V
  Input current
  ● for signal "1", typ.		3.7 mA
  Input delay (for rated value of input voltage)
  for standard inputs
  — parameterizable		Yes
  Cable length
  ● shielded, max.		1 000 m
  ● unshielded, max.		500 m
  Interrupts/diagnostics/status information
  Diagnostics function		Yes
  Alarms
  ● Diagnostic alarm		Yes
  ● Hardware interrupt		No
  Diagnostic messages
  ● Monitoring the supply voltage		Yes
  ● Wire-break		No
  ● Short-circuit		Yes
  ● Group error		Yes
  Diagnostics indication LED
  ● RUN LED		Yes; Green LED
  ● ERROR LED		Yes; Red LED
  ● Channel status display		Yes; Green LED
  ● for channel diagnostics		Yes; Red LED
  ● for module diagnostics		Yes; Red LED
  Potential separation
  Potential separation channels
  ● between the channels and backplane bus		Yes
  Isolation
  Isolation tested with		707 V DC (type test)
  Standards, approvals, certificates
  Suitable for safety functions		Yes
  Highest safety class achievable in safety mode
  ● Performance level according to ISO 13849-1		PLe
  ● SIL acc. to IEC 61508		SIL 3
  Probability of failure (for service life of 20 years and repair time of 100 hours)
  — Low demand mode: PFDavg in accordance with SIL3		< 5.00E-05
  — High demand/continuous mode: PFH in accordance with SIL3		< 1.00E-09 1/h
  Ambient conditions
  Ambient temperature during operation
  ● horizontal installation, min.		0 °C
  ● horizontal installation, max.		60 °C
  ● vertical installation, min.		0 °C
  ● vertical installation, max.		40 °C
  Dimensions
  Width		35 mm
  Height		147 mm
  Depth		129 mm
  Weights
  Weight, approx.		280 g