SIPLUS Control Units CU310-2 for single-axis drives

• Заказные данные
  (2)
• Аксессуары
  (1)
• Информационные материалы

  Информационные материалы

  

  SINAMICS S120, CU310-2 PN and CU310-2 DP

  The CU310-2 control unit is designed for the communication and open-loop/closed-loop control functions of a SINAMICS S120 (AC/AC) and is combined with the PM340 power module to create a powerful single-axis drive. A PROFINET (PN) variant and a PROFIBUS (DP) variant are available for fieldbus communication.

  The SIPLUS S120 Basic Operator Panel (BOP) is available as an accessory. The operating device has a miniature 2-line display, 6 keys for parameterization and diagnostics and is suitable for use with CU305, CU310 and CU320 Control Units.

  Note:

  SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the corresponding standard products. SIPLUS extreme-specific information was added.

  Технические данные

  Order number			6AG1040-1LA00-2AA0	6AG1040-1LA01-2AA0
  product brandname			SIPLUS
  Product designation			Controller
  General technical data:
  Design of the product			CU310-2 DP	CU310-2 PN
  Product function
  ● vector control with encoder			No
  ● vector control without encoder			Yes
  Product function for U/f control
  ● ECO mode linear or quadratic			No
  ● flux current control			No
  ● linear or quadratic parameterization			No
  Operating voltage
  ● from external supply voltage		V	28.8 ... 20.4
  ● from power module		V	24
  Input voltage at analog inputs as voltage inputs
  ● for signal <0> to <1>		V	0
  Consumed current maximum		A	0.3
  AWG number as coded connectable conductor cross section for signal line			30 ... 16
  Power loss [W] maximum		W	20
  Protection class IP			IP20
  Width		mm	73
  Height		mm	191
  Depth		mm	75
  Net weight		kg	0.95
  Inputs/ Outputs:
  Type of analog input			Differential input
  Number of analog inputs			1
  ● Note			The differential analog inputs can be configured as supplementary digital inputs
  Number of digital inputs			11
  ● Note			According to IEC 61131-2 type 1, 5 floating digital inputs, 8 bidirectional non-floating digital inputs/outputs, 3 parameterizable failsafe digital inputs (electrically isolated) or, alternatively, 6 parameterizable digital inputs (electrically isolated)
  Number of digital inputs with fail-safe			3
  ● Number of digital inputs with fail-safe Note			optionally parameterizable as safe inputs
  Number of digital outputs as relay change-over contact			0
  Number of digital outputs as transistor			0
  Communication:
  Number of interfaces
  ● acc. to RS 485			1	0
  ● acc. to PROFINET			0	2
  Protocol is supported PROFIBUS protocol			Yes	No
  Ambient conditions:
  Relative humidity maximum		%	100
  ● Note			RH, incl. condensation/frost permitted (no commissioning in bedewed state)
  Ambient temperature
  ● during operation			-20 ... +55
  ● during storage			-40 ... +70
  Ambient temperature [°F]
  ● during operation			-4 ... +131
  — Note			A derating of 3 K/1000 m has to be applied to the Control Units from an installation altitude of 1000 m above sea level
  ● during storage			-40 ... +158
  Resistance to biologically active substances conformity acc. to EN 60721-3-3			Yes
  Resistance to biologically active substances			Class 3B2 acc. to EN 60721-3-3, mold and fungal spores (except fauna)
  ● conformity acc. to EN 60721-3-3 Note			The supplied plug covers must remain in place over the unused interfaces during operation!
  conformity acc. to EN 60721-3-3			Yes
  Resistance to chemically active substances			Class 3C4 acc. to EN 60721-3-3, including salt spray acc. to EN 60068-2-52 (severity level 3)
  ● conformity acc. to EN 60721-3-3 Note			Compliant with EN 60721-3-3, Class 3C4 incl. salt spray in accordance with EN 60068-2-52 (severity 3); the supplied plug covers must remain in place on the unused interfaces during operation.
  Resistance to mechanically active substances conformity acc. to EN 60721-3-3			No
  Certificate of suitability			CE / TÜV
  Certificate of suitability for CE marking			Low-voltage directive 2006/95/EC

  
  

  Order number			6AG1055-0AA00-2BA0
  product brandname			SIPLUS
  Product designation			Controller
  General technical data:
  Design of the product			BOP 20
  Product function
  ● vector control with encoder			No
  ● vector control without encoder			No
  Product function for U/f control
  ● ECO mode linear or quadratic			No
  ● flux current control			No
  ● linear or quadratic parameterization			No
  AWG number as coded connectable conductor cross section for signal line			0 ... 0
  Protection class IP			IP20
  Width		mm	49
  Height		mm	48
  Depth		mm	8
  Net weight		kg	0.05
  Inputs/ Outputs:
  Number of analog inputs			0
  Number of digital inputs			0
  Number of digital inputs with fail-safe			0
  Number of digital outputs as relay change-over contact			0
  Number of digital outputs as transistor			0
  Communication:
  Number of interfaces
  ● acc. to RS 485			0
  ● acc. to PROFINET			0
  Protocol is supported PROFIBUS protocol			No
  Ambient conditions:
  Relative humidity maximum		%	100
  ● Note			RH, incl. condensation/frost permitted (no commissioning in bedewed state)
  Ambient temperature
  ● during operation			-20 ... +70
  ● during storage			-40 ... +70
  Ambient temperature [°F]
  ● during operation			-4 ... +158
  — Note			A derating of 3 K/1000 m has to be applied to the Control Units from an installation altitude of 1000 m above sea level
  ● during storage			-40 ... +158
  Resistance to biologically active substances conformity acc. to EN 60721-3-3			Yes
  Resistance to biologically active substances			Class 3B2 acc. to EN 60721-3-3, mold and fungal spores (except fauna)
  ● conformity acc. to EN 60721-3-3 Note			The supplied plug covers must remain in place over the unused interfaces during operation!
  conformity acc. to EN 60721-3-3			Yes
  Resistance to chemically active substances			Class 3C4 acc. to EN 60721-3-3, including salt spray acc. to EN 60068-2-52 (severity level 3)
  ● conformity acc. to EN 60721-3-3 Note			Compliant with EN 60721-3-3, Class 3C4 incl. salt spray in accordance with EN 60068-2-52 (severity 3); the supplied plug covers must remain in place on the unused interfaces during operation.
  Resistance to mechanically active substances conformity acc. to EN 60721-3-3			No
  Certificate of suitability			CE
  Certificate of suitability for CE marking			EN 61800-3