HydroRanger 200 HMI

Заказные данные
(1)
Аксессуары
(33)

HydroRanger 200 HMI is an ultrasonic level controller for up to six pumps and provides control, differential control, and open channel flow monitoring.

Область применения

For water authorities, municipal water, and wastewater plants, HydroRanger 200 HMI is an economical, low-maintenance solution delivering control efficiency and productivity needed to meet today’s exacting standards. It offers single point monitoring with all models, and optional dual-point monitoring with 6 relay model. As well, it has digital communications with built-in Modbus RTU via RS 485.

The standard 6 relay HydroRanger 200 HMI will monitor open channel flow and features advanced relay alarming and pump control functions as well as volume conversion. It is compatible with SIMATIC PDM, allowing for PC configuration and set-up. Sonic Intelligence advanced echo-processing software provides increased reading reliability.

HydroRanger 200 HMI uses proven continuous ultrasonic echo ranging technology to monitor water and wastewater of any consistency up to 15 m (50 ft) in depth. Achievable resolution is 0.1 % with accuracy to 0.25 % of range. Unlike contacting devices, HydroRanger 200 HMI is immune to problems caused by suspended solids, harsh corrosives, grease or silt in the effluent, reducing downtime.

Key Applications: wet wells, flumes/weirs, bar screen control

Чертеж

HydroRanger 200 HMI, dimensions in mm (inch)

Особенности

Easy to use HMI display with local four-button programming, menu-driven parameters, and Wizard support for key applications
English, German, French, Spanish, Chinese, Italian, Portuguese, and Russian texts on the HMI
Removable terminal blocks for ease of wiring
Monitors wet wells, weirs, and flumes
Communication using built-in Modbus RTU via RS 485 and SIMATIC PDM configuration software
Compatible with SmartLinx system: PROFIBUS DP (cyclic access of process values only) and DeviceNET
Single or dual point level monitoring
6 relays
Auto False-Echo Suppression for fixed obstruction avoidance
Anti-grease ring/tide mark buildup
Differential amplifier transceiver for common mode noise rejection and improved signal-to-noise ratio
Wall and panel mounting options

Схема подключения

HydroRanger 200 HMI connections

Технические данные

Mode of Operation
Measuring principle	Ultrasonic level measurement
Measuring range	0.3 ... 15 m (1 ... 50 ft), transducer dependent
Measuring points	1 or 2
Input
Analog	0 ... 20 mA or 4 ... 20 mA, from alternate device, scalable (6 relay model)
Discrete	10 ... 50 V DC switching level Logical 0 ≤ 0.5 V DC Logical 1 = 10 ... 50 V DC max. 3 mA
Output
EchoMax transducer	44 kHz
Ultrasonic transducer	Compatible transducers: ST-H and EchoMax series XPS-10, XPS-15/15F, and XRS-5
Relays¹⁾	Rating 5 A at 250 V AC, non-inductive
Model with 6 relays	4 SPST Form A/2 SPDT Form
mA output	0 ... 20 mA or 4 ... 20 mA
Max. load	750 Ω, isolated
Resolution	0.1 % of range
Accuracy
Error in measurement	0.25 % of range or 6 mm (0.24 inch), whichever is greater
Resolution	0.1 % of measuring range or 2 mm (0.08 inch), whichever is greater²⁾
Temperature compensation	-50 ... +150 °C (-58 ... +302 °F) Integral temperature sensor in transducer External TS-3 temperature sensor (optional) Programmable fixed temperature values
Rated operating conditions
Installation conditions
Location	Indoor / outdoor
Installation category	II
Pollution degree	4
Ambient conditions
Ambient temperature (enclosure)	-20 ... +50 °C (-4 ... +122 °F)
Design
Weight
Wall mount	1.22 kg (2.68 lb)
Panel mount	1.35 kg (2.97 lb)
Material (enclosure)	Polycarbonate
Degree of protection (enclosure)
Wall mount	IP65/Type 4X/NEMA 4X
Panel mount	IP54/Type 3/NEMA 3
Cable
Transducer and mA output signal	2-core copper conductor, twisted, shielded, 300 Vrms, 0.82 mm² (18 AWG), Belden 8 760 or equivalent is acceptable
Max. separation between transducer and transceiver	365 m (1 200 ft)
Displays and controls	60 x 40 mm (2.36 x 1.57 inch) LCD 240 x 160 pixels resolution
Power supply³⁾
AC version	100 ... 230 V AC ± 15 %, 50/60 Hz, 36 VA (17 W)
DC version	12 ... 30 V DC (20 W)
Certificates and approvals	CE, RCM⁴⁾ FM, CSA_US/C, UL listed CSA_US/C Class I, Div. 2, Groups A, B, C and D, Class II, Div. 2, Groups F and G, Class III (wall mount only) MCERTS Class 2 approved for Open Channel Flow
Communication	RS 232 with Modbus RTU or ASCII via RJ-11 connector RS 485 with Modbus RTU or ASCII via terminal blocks Optional: SmartLinx cards for PROFIBUS DPV1 (cyclic access of process values only) DeviceNet

¹⁾ All relays certified for use with equipment that fails in a state at or under the rated maximums of the relays.²⁾ Program range is defined as the empty distance to the face of the transducer plus any range extension.³⁾ Maximum power consumption is listed ⁴⁾ EMC performance available upon request

Полезное

ENG_495946.PDF