Plug-in transceivers for SCALANCE X-300 managed

• Заказные данные
  (9)
• Информационные материалы

  Информационные материалы

  • Plug-in transceivers offer the capability of flexibly equipping the modular SCALANCE X-300 Industrial Ethernet switches for optical connections
  • With an operating temperature range from -40 °C to +70 °C, the plug-in transceivers are especially suited for use in demanding environments
  • All specified plug-in transceivers are tested for use with SCALANCE devices
  • There are different versions that differ depending on suitable fiber types, range, and bandwidth

  

  Modular SCALANCE XR324-12M

  Product versions

  SFP (small form-factor pluggable) transceivers can only be used together with the MM992-2SFP media module in the modular X-300 Industrial Ethernet switches.

  

  MM992-2SFP media module with SFP plug-in transceiver

  Optical SFP plug-in transceivers with 1 x 100 Mbps LC port

  • SFP991-1 multi-mode, glass, up to 5 km
  • SFP991-1LD single-mode, glass, up to 26 km
  • SFP991-1LH+ single-mode, glass, up to 70 km
  • SFP991-1ELH200 single-mode, glass, up to 200 km

  Optical SFP plug-in transceivers with 1 × 1000 Mbps LC port

  • SFP992-1 multi-mode, glass, up to 750 m
  • SFP992-1LD single-mode, glass, up to 10 km
  • SFP992-1LH single-mode, glass, up to 40 km
  • SFP992-1LH+ single-mode, glass, up to 70 km
  • SFP992-1ELH single-mode, glass, up to 120 km

  Дизайн

  • Operating temperature range of the SFP plug-in transceivers from -40 °C to +70 °C
  • SFP plug-in transceivers have an LC connection
  • IP20 degree of protection

  Особенности

  

  • Cost savings due to the modular system. The modular system allows the setup of electrical and optical Industrial Ethernet networks and the network topology and port type to easily be adapted to the plant structure and expanded at any time
  • Integrated industrial network for data, speech, and video; high performance due to Gigabit ports

  Технические данные

  Order number		6GK5991-1AD00-8AA0	6GK5991-1AF00-8AA0	6GK5991-1AE00-8AA0	6GK5991-1AE30-8AA0
  Product type designation		SFP991-1	SFP991-1LD	SFP991-1LH+	SFP991-1ELH200
  Interfaces
  Number of electrical/optical connections for network components or terminal equipment maximum		1	1	1	1
  Number of optical interfaces for network components or terminal equipment maximum		1	1	1	1
  Number of 100 Mbit/s LC ports		1	1	1	1
  Design of the optical interface for network components or terminal equipment		LC	LC	LC	LC
  Wavelength of the optical interface		1 310 nm; Multi-mode	1 310 nm; Single-mode	1 550 nm; Single-mode	1 550 nm; Single-mode
  Connectable optical power relative to 1 mW
  ● of the transmitter output minimum		-19 dB	-15 dB	-5 dB	1 dB
  ● of the transmitter output maximum		-14 dB	-8 dB	0 dB	5 dB
  ● of the receiver input maximum		-3 dB	-3 dB	-3 dB	-9 dB
  Optical sensitivity relating to 1 mW of the receiver input minimum		-32 dB	-34 dB	-34 dB	-42 dB
  Damping ratio of the FOC transmission link minimum necessary		0 dB	0 dB	3 dB	14 dB
  Range at the optical interface depending on the optical fiber used		0 ... 5 km	0 ... 26 km	12 ... 70 km	61 ... 200 km
  Permitted ambient conditions
  Ambient temperature
  ● during operation		-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C
  ● during storage		-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C
  ● during transport		-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C
  ● Note		A maximum ambient operating temperature of +85 °C is permissible for a duration of 16 hours	A maximum ambient operating temperature of +85 °C is permissible for a duration of 16 hours	A maximum ambient operating temperature of +85 °C is permissible for a duration of 16 hours	A maximum ambient operating temperature of +85 °C is permissible for a duration of 16 hours
  Relative humidity at 25 °C without condensation during operation maximum		95 %	95 %	95 %	95 %
  Protection class IP		IP20	IP20	IP20	IP20
  Design, dimensions and weight
  Design		SFP Module	SFP Module	SFP Module	SFP Module
  Width		13.7 mm	13.7 mm	13.7 mm	13.7 mm
  Height		11.9 mm	11.9 mm	11.9 mm	11.9 mm
  Depth		56.5 mm	56.5 mm	56.5 mm	56.5 mm
  Net weight		0.01 kg	0.01 kg	0.01 kg	0.01 kg
  Mounting type		latched	latched	latched	latched
  Standards, specifications, approvals
  Standard
  ● for FM		FM3611: Class 1, Divison 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4	FM3611: Class 1, Divison 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4	FM3611: Class 1, Divison 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4	FM3611: Class 1, Divison 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4
  ● for hazardous zone		EN 60079-0: 2006, EN60079-15: 2005, II 3 G Ex nA II T4, KEMA 07 ATEX 0145 X	EN 60079-0: 2006, EN60079-15: 2005, II 3 G Ex nA II T4, KEMA 07 ATEX 0145 X	EN 60079-0: 2006, EN60079-15: 2005, II 3 G Ex nA II T4, KEMA 07 ATEX 0145 X	EN 60079-0: 2006, EN60079-15: 2005, II 3 G Ex nA II T4, KEMA 07 ATEX 0145 X
  ● for safety from CSA and UL		UL 60950-1, CSA C22.2 No. 60950-1-03	UL 60950-1, CSA C22.2 No. 60950-1-03	UL 60950-1, CSA C22.2 No. 60950-1-03	UL 60950-1, CSA C22.2 No. 60950-1-03
  ● for emitted interference		EN 61000-6-4:2007 (Class A)	EN 61000-6-4:2007 (Class A)	EN 61000-6-4:2007 (Class A)	EN 61000-6-4:2007 (Class A)
  ● for interference immunity		EN 61000-6-2:2005	EN 61000-6-2:2005	EN 61000-6-2:2005	EN 61000-6-2:2005
  Certificate of suitability		EN 61000-6-2:2005, EN 61000-6-4:2007	EN 61000-6-2:2005, EN 61000-6-4:2007	EN 61000-6-2:2005, EN 61000-6-4:2007	EN 61000-6-2:2005, EN 61000-6-4:2007
  ● CE marking		Yes	Yes	Yes	Yes
  ● C-Tick		Yes	Yes	Yes	Yes
  ● KC approval		No	No	No	No
  MTBF at 40 °C		120 y	120 y	120 y	120 y

  
  

  Order number		6GK5992-1AL00-8AA0	6GK5992-1AM00-8AA0	6GK5992-1AN00-8AA0
  Product type designation		SFP992-1	SFP992-1LD	SFP992-1LH
  Interfaces
  Number of electrical/optical connections for network components or terminal equipment maximum		1	1	1
  Number of optical interfaces for network components or terminal equipment maximum		1	1	1
  Number of 1000 Mbit/s LC ports for single mode (LD) Integrated			1	1
  Number of 1000 Mbit/s LC ports for multimode Integrated		1
  Design of the optical interface for network components or terminal equipment		LC	LC	LC
  Wavelength of the optical interface		850 nm; Multi-mode	1 310 nm; Single-mode	1 550 nm; Single-mode
  Connectable optical power relative to 1 mW
  ● of the transmitter output minimum		-9.5 dB	-9.5 dB	-6 dB
  ● of the transmitter output maximum		-4 dB	-3 dB	0 dB
  ● of the receiver input maximum		-3 dB	-3 dB	-3 dB
  Optical sensitivity relating to 1 mW of the receiver input minimum		-17 dB	-21 dB	-23 dB
  Damping ratio of the FOC transmission link minimum necessary		0 dB	0 dB	3 dB
  Range at the optical interface depending on the optical fiber used		0 ... 0.75 km	0 ... 10 km	8 ... 40 km
  Permitted ambient conditions
  Ambient temperature
  ● during operation		-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C
  ● during storage		-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C
  ● during transport		-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C
  ● Note		A maximum ambient operating temperature of +85 °C is permissible for a duration of 16 hours	A maximum ambient operating temperature of +85 °C is permissible for a duration of 16 hours	A maximum ambient operating temperature of +85 °C is permissible for a duration of 16 hours
  Relative humidity at 25 °C without condensation during operation maximum		95 %	95 %	95 %
  Protection class IP		IP20	IP20	IP20
  Design, dimensions and weight
  Design		SFP Module	SFP Module	SFP Module
  Width		13.7 mm	13.7 mm	13.7 mm
  Height		11.9 mm	11.9 mm	11.9 mm
  Depth		56.5 mm	56.5 mm	56.5 mm
  Net weight		0.01 kg	0.01 kg	0.01 kg
  Mounting type		latched	latched	latched
  Standards, specifications, approvals
  Standard
  ● for FM		FM3611: Class 1, Divison 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4	FM3611: Class 1, Divison 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4	FM3611: Class 1, Divison 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4
  ● for hazardous zone		EN 60079-0: 2006, EN60079-15: 2005, II 3 G Ex nA II T4, KEMA 07 ATEX 0145 X	EN 60079-0: 2006, EN60079-15: 2005, II 3 G Ex nA II T4, KEMA 07 ATEX 0145 X	EN 60079-0: 2006, EN60079-15: 2005, II 3 G Ex nA II T4, KEMA 07 ATEX 0145 X
  ● for safety from CSA and UL		UL 60950-1, CSA C22.2 No. 60950-1-03	UL 60950-1, CSA C22.2 No. 60950-1-03	UL 60950-1, CSA C22.2 No. 60950-1-03
  ● for emitted interference		EN 61000-6-4:2007 (Class A)	EN 61000-6-4:2007 (Class A)	EN 61000-6-4:2007 (Class A)
  ● for interference immunity		EN 61000-6-2:2005	EN 61000-6-2:2005	EN 61000-6-2:2005
  Certificate of suitability		EN 61000-6-2:2005, EN 61000-6-4:2007	EN 61000-6-2:2005, EN 61000-6-4:2007	EN 61000-6-2:2005, EN 61000-6-4:2007
  ● CE marking		Yes	Yes	Yes
  ● C-Tick		Yes	Yes	Yes
  ● KC approval		No	No	No
  MTBF at 40 °C		120 y	120 y	120 y

  
  

  Order number		6GK5992-1AP00-8AA0	6GK5992-1AQ00-8AA0
  Product type designation		SFP992-1LH+	SFP992-1ELH
  Interfaces
  Number of electrical/optical connections for network components or terminal equipment maximum		1	1
  Number of optical interfaces for network components or terminal equipment maximum		1	1
  Number of 1000 Mbit/s LC ports for single mode (LD) Integrated		1	1
  Design of the optical interface for network components or terminal equipment		LC	LC
  Wavelength of the optical interface		1 550 nm; Single-mode	1 550 nm; Single-mode
  Connectable optical power relative to 1 mW
  ● of the transmitter output minimum		0 dB	0 dB
  ● of the transmitter output maximum		5 dB	5 dB
  ● of the receiver input maximum		-3 dB	-8 dB
  Optical sensitivity relating to 1 mW of the receiver input minimum		-23 dB	-32 dB
  Damping ratio of the FOC transmission link minimum necessary		8 dB	8 dB
  Range at the optical interface depending on the optical fiber used		30 ... 70 km	37 ... 120 km
  Permitted ambient conditions
  Ambient temperature
  ● during operation		-40 ... +85 °C	-40 ... +85 °C
  ● during storage		-40 ... +85 °C	-40 ... +85 °C
  ● during transport		-40 ... +85 °C	-40 ... +85 °C
  ● Note		A maximum ambient operating temperature of +85 °C is permissible for a duration of 16 hours	A maximum ambient operating temperature of +85 °C is permissible for a duration of 16 hours
  Relative humidity at 25 °C without condensation during operation maximum		95 %	95 %
  Protection class IP		IP20	IP20
  Design, dimensions and weight
  Design		SFP Module	SFP Module
  Width		13.7 mm	13.7 mm
  Height		11.9 mm	11.9 mm
  Depth		56.5 mm	56.5 mm
  Net weight		0.01 kg	0.01 kg
  Mounting type		latched	latched
  Standards, specifications, approvals
  Standard
  ● for FM		FM3611: Class 1, Divison 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4	FM3611: Class 1, Divison 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4
  ● for hazardous zone		EN 60079-0: 2006, EN60079-15: 2005, II 3 G Ex nA II T4, KEMA 07 ATEX 0145 X	EN 60079-0: 2006, EN60079-15: 2005, II 3 G Ex nA II T4, KEMA 07 ATEX 0145 X
  ● for safety from CSA and UL		UL 60950-1, CSA C22.2 No. 60950-1-03	UL 60950-1, CSA C22.2 No. 60950-1-03
  ● for emitted interference		EN 61000-6-4:2007 (Class A)	EN 61000-6-4:2007 (Class A)
  ● for interference immunity		EN 61000-6-2:2005	EN 61000-6-2:2005
  Certificate of suitability		EN 61000-6-2:2005, EN 61000-6-4:2007	EN 61000-6-2:2005, EN 61000-6-4:2007
  ● CE marking		Yes	Yes
  ● C-Tick		Yes	Yes
  ● KC approval		No	No
  MTBF at 40 °C		120 y	120 y