SIPLUS Power Modules

Заказные данные
(4)

Информационные материалы

Power Modules PM240‑2 – 0.55 kW to 15 kW, IP20 degree of protection

SINAMICS G120, FSA - FSC, PM230 and PT

Power Modules PM240‑2, frame sizes FSA to FSF (with control unit and operator panel)

SINAMICS G120, FSA - FSC, PM230 and PT

Power Modules PM240‑2, IP20 degree of protection, push-through version, frame sizes FSA to FSC (with control unit and operator panel)

The new PM240‑2 Power Modules are based on a new hardware platform. This permits an increase in power density as well as the application of innovative cooling concepts (push-through technology) with especially high requirements in terms of control cabinet cooling.

Furthermore, the PM240-2 Power Module is also suitable for use in safety-oriented applications. In conjunction with a fail-safe control unit, the drive can be turned into a Safety Integrated Drive. The PM240‑2 Power Module frame sizes FSA to FSC are available both with and without an integrated line filter class A of compact design for 200 V and 400 V line voltages. The PM240-2 Power Modules with integrated line filter class A are suitable for connection to TN supply systems. Power Modules without an integrated line filter can be connected to grounded TN/TT systems and non-grounded IT systems.

The cable lengths permitted between converter and motor are limited. Longer cables can be used if output reactors are connected.

Push-through version

The push-through version allows the cooling fins of the Power Module to be pushed through the rear panel of the control cabinet. Push-through versions should be used in applications in which the amount of waste heat generated inside the control cabinet itself must be minimized.

Shield plates and shield connection kits are available for use when wiring control units and power modules to ensure compliance with EMC guidelines.

Note:

SIPLUS extreme products are based on SINAMICS standard products. The contents listed here were taken from the corresponding standard products. SIPLUS extreme-specific information was added.

Технические данные

Order number		6AG1210-1PE14-2UL1	6AG1210-1PE18-2UL1	6AG1210-1PE21-2UL0	6AG1210-1PE23-2UL0
product brandname		SIPLUS
Product designation		Power unit
General technical data:
Design of the product		PM240-2
Vibration frequency during transport acc. to EN 60721-3-2 Note		Class 2M3
Shock acceleration during operation acc. to EN 60068-2-27	m/s²	147
Power factor		0.85
Brake version		DC braking, compound braking, resistance braking with integrated brake chopper (for size FSGX optional)
Protection function parameter lock		Yes
Electrical output frequency	Hz	50
Consumed current from supply voltage for Control Unit at DC at 24 V	A	1
Phase number of the output voltage		3
Input current
● with low overload rated value	A	5.5	10.1	22.2	39.9
● with high overload rated value	A	4.7	8.8	19.8	36
Output current
● rated value maximum	A	6.2	11.8	27	52
● without overload rated value	A	4.1	7.7	18	32
● with low overload rated value	A	4.1	7.7	18	32
● with high overload rated value	A	3.1	5.9	13.2	26
Supplied active power at rated value of output voltage
● with low overload	kW	1.5	3	7.5	15
● with high overload	kW	1.1	2.2	5.5	11
Efficiency		0.96		0.97
Cooling air flow	m³/s	0.005		0.0092	0.019
1 m measuring surface sound pressure level maximum	dB	50		62	65
Type of electrical connection
● for PE conductor		Plug-in screw terminals
● for mains supply line		Plug-in screw terminals
● of the motor		Plug-in screw terminals
Connectable conductor cross-section for mains supply line		1 ... 2.5	1.5 ... 2.5	1.5 ... 6	6 ... 16
Connectable conductor cross-section for motor supply line		1 ... 2.5	1.5 ... 2.5	1.5 ... 6	6 ... 16
Wire length for motor shielded maximum	m	50
Power loss [W] maximum	kW	0.07	0.12	0.2	0.37
Protection class IP		IP20
Width	mm	73		100	140
Height	mm	196		292	355
Depth	mm	165
Design of the converter		FSA		FSB	FSC
Net weight	kg	1.4		3	4.8
Ambient conditions:
Ambient temperature during operation maximum	°C	55
Relative humidity without condensation during operation maximum Note		RH incl. condensation/frost (no commissioning in bedewed state)
Relative humidity without condensation during operation maximum	%	100
Touch protection acc. to EN 61800-5-1		Assuming use as prescribed
Operating resource protection class acc. to EN 61800-5-1		Class I (with protective bonding circuit) and Class III (PELV)
Ambient temperature
● during storage		-25 ... +55
● during transport		-40 ... +70
Ambient temperature [°F]
● during storage		-13 ... +131
● during storage maximum Note		Class 1K3 acc. to EN 60721-3-1
● during transport		-40 ... +158
● during transport maximum Note		Class 2K3 according to EN 60721-3-2
Degree of pollution		2 according to EN 61800-5-1
Resistance to biologically active substances conformity acc. to EN 60721-3-3		Yes
Resistance to biologically active substances		Class 3B2 acc. to EN 60721-3-3, mold and fungal spores (except fauna)
● conformity acc. to EN 60721-3-3 Note		The supplied plug covers must remain in place over the unused interfaces during operation!
conformity acc. to EN 60721-3-3		Yes
Resistance to chemically active substances		Class 3C4 acc. to EN 60721-3-3, including salt spray acc. to EN 60068-2-52 (severity level 3)
● conformity acc. to EN 60721-3-3 Note		Compliant with EN 60721-3-3, Class 3C4 incl. salt spray in accordance with EN 60068-2-52 (severity 3); the supplied plug covers must remain in place on the unused interfaces during operation.
Resistance to mechanically active substances conformity acc. to EN 60721-3-3		No
Certificate of suitability		CE / TÜV
Certificate of suitability for CE marking		EMC Directive 2004/108/EC, Low-Voltage Directive 2006/95/EC
Standard for EMC acc. to EN 61800-3		The EMC product standard EN 61800-3 does not apply directly to a frequency inverter but to a PDS (Power Drive System), which comprises the complete circuitry, motor and cables in addition to the inverter.
Product component Line filter		No
Power Electronics:
Type of voltage of the input voltage		AC
Electrical output frequency
● for U/f control		0 ... 650
● for vector control		0 ... 200
Pulse frequency rated value	kHz	4
Output voltage in percent related to the input voltage		0 ... 95
Type of duty cycle duration
● with low overload		1.1 x rated output current (i.e. 110 % overload) for 57 s with a cycle time of 300 s 1.5 × rated output current (i.e. 150 % overload) for 3 s with a cycle time of 300 s
● with high overload		1.5 × output current rating (i.e., 150 % overload) for 57 s with a cycle time of 300 s 2 × output current rating (i.e., 200 % overload) for 3 s with a cycle time of 300 s
Type of cooling		Internal air cooling
Installation altitude at height above sea level without power reduction maximum	m	1 000
Short-time withstand current (SCCR) of the entire control cabinet acc. to UL 508A	kA	65
Protection function
● undervoltage protection		Yes
● Overvoltage protection		Yes
● Overload protection		Yes
● Ground fault protection		Yes
● Short-circuit protection		Yes
● Stall protection		Yes
● with blocked rotor		Yes
● for motor Temperature monitoring		Yes
● for converter Temperature monitoring		Yes
Mechanical data:
Shock acceleration during operation Note		(15 × g)/11 ms
Vibration frequency with constant deflection during operation acc. to EN 60068-2-6 maximum Note		constant deflection 0.075 mm
Vibration frequency with constant deflection during operation acc. to EN 60068-2-6		10 ... 58
Vibration frequency with constant acceleration during operation acc. to EN 60068-2-6 maximum Note		constant acceleration = 9.81 m/s2 (1 × g)
Vibration frequency with constant acceleration during operation acc. to EN 60068-2-6		58 ... 200