Output reactors

• Заказные данные
  (10)
• Информационные материалы

  Информационные материалы

  

  Output reactor for PM230 Power Modules, frame size FSA

  Output reactors reduce the rate of voltage rise (dv/dt) and the height of the current peaks, and enable longer motor cables to be connected.

  Owing to the high rates of voltage rise of the fast-switching IGBTs, the capacitance of long motor cables reverses polarity very quickly with every switching operation in the inverter. As a result, the inverter is loaded with additional current peaks of substantial magnitude.

  Output reactors reduce the magnitude of these additional peaks because the cable capacitance reverses polarity more slowly across the reactor inductance, thereby attenuating the amplitudes of the current peaks.

  When using output reactors, the following should be observed:

  • Max. permissible output frequency 200 Hz
  • Max. permissible pulse frequency 4 kHz
  • The output reactor must be installed as close as possible to the Power Module

  Интеграция

  Output reactors that are optionally available depending on the Power Module used

  The following load-side power components are optionally available in the appropriate frames sizes for the Power Modules:

  	Frame size
  	FSA	FSB	FSC	FSD	FSE	FSF
  PM230 Power Module degree of protection IP20 or IP55/UL Type 12
  Available frame sizes	✓	✓	✓	✓	✓	✓
  Load-side power components
  Output reactor	S	S	S	S	S	S

  
  
  

  S = Lateral mounting

  – = Not possible

  Технические данные

  Line voltage 380 ... 480 V 3 AC		Output reactor
  		6SL3202-0AE16-1CA0	6SL3202-0AE18-8CA0	6SL3202-0AE21-8CA0	6SL3202-0AE23-8CA0
  Rated current	A	6.1	9	18.5	39
  Power loss	kW	0.09	0.08	0.08	0.11
  Connection to the Power Module/motor connection		Screw terminals	Screw terminals	Screw terminals	Screw terminals
  Conductor cross-section	mm2	4	4	10	16
  PE connection		M4 screw stud	M4 screw stud	M5 screw stud	M5 screw stud
  Cable length, max. between output reactor and motor
  380 V -10 % ... 415 V +10 % 3 AC
  Shielded	m (ft)	150 (492.15)	150 (492.15)	150 (492.15)	150 (492.15)
  Unshielded	m (ft)	225 (738.23)	225 (738.23)	225 (738.23)	225 (738.23)
  440 ... 480 V 3 AC +10 %
  Shielded	m (ft)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)
  Unshielded	m (ft)	150 (492.15)	150 (492.15)	150 (492.15)	150 (492.15)
  Dimensions
  Width	mm (in)	207 (8.15)	207 (8.15)	247 (9.72)	257 (10.12)
  Height	mm (in)	175 (6.89)	180 (7.09)	215 (8.46)	235 (9.25)
  Depth	mm (in)	72.5 (2.85)	72.5 (2.85)	100 (3.94)	114.7 (4.52)
  Possible as base component		No	No	No	No
  Degree of protection		IP20	IP20	IP20	IP20
  Weight, approx.	kg (lb)	3.4 (7.50)	3.9 (8.60)	10.1 (22.3)	11.2 (24.7)
  Suitable for PM230 Power Module degree of protection IP20	Type	6SL3210-1NE11-3 . L1 6SL3210-1NE11-7 . L1 6SL3210-1NE12-2 . L1 6SL3210-1NE13-1 . L1 6SL3210-1NE14-1 . L1 6SL3210-1NE15-8 . L1	6SL3210-1NE17-7 . L1	6SL3210-1NE21-0 . L1 6SL3210-1NE21-3 . L1 6SL3210-1NE21-8 . L1	6SL3210-1NE22-6 . L1 6SL3210-1NE23-2 . L1 6SL3210-1NE23-8 . L1
  Suitable for PM230 Power Module degree of protection IP20 Push Through variant	Type	-	6SL3211-1NE17-7 . L1	6SL3211-1NE21-8 . L1	6SL3211-1NE23-8 . L1
  Suitable for PM230 Power Module degree of protection IP55/UL Type 12	Type	6SL3223-0DE13-7 . A1 6SL3223-0DE15-5 . A1 6SL3223-0DE17-5 . A1 6SL3223-0DE21-1 . A1 6SL3223-0DE21-5 . A1 6SL3223-0DE22-2 . A1	6SL3223-0DE23-0 . A1	6SL3223-0DE24-0 . A1 6SL3223-0DE25-5 . A1 6SL3223-0DE27-5 . A1	6SL3223-0DE31-1 . A1 6SL3223-0DE31-5 . A1 6SL3223-0DE31-8AA1 FSC   6SL3223-0DE31-8BA0 FSD
  Frame size		FSA	FSA	FSB	FSC/FSD

  
  
  

   

  Line voltage 380 ... 480 V 3 AC		Output reactor
  		6SE6400-3TC03-8DD0	6SE6400-3TC05-4DD0	6SE6400-3TC08-0ED0	6SE6400-3TC07-5ED0
  Rated current	A	45 1)	68 1)	104 1)	90 1)
  Power loss	kW	0.2	0.2	0.17	0.27
  Connection to the Power Module		Flat connector for M6 cable lug	Flat connector for M6 cable lug	Flat connector for M6 cable lug	Flat connector for M6 cable lug
  Motor connection		Flat connector for M6 cable lug	Flat connector for M6 cable lug	Flat connector for M6 cable lug	Flat connector for M6 cable lug
  PE connection		M6 screw	M6 screw	M6 screw	M6 screw
  Cable length, max. between output reactor and motor
  380 V -10 % ... 480 V +10 % 3 AC
  Shielded	m (ft)	200 (656.20)	200 (656.20)	200 (656.20)	200 (656.20)
  Unshielded	m (ft)	300 (984.30)	300 (984.30)	300 (984.30)	300 (984.30)
  Dimensions
  Width	mm (in)	225 (8.86)	225 (8.86)	225 (8.86)	270 (10.63)
  Height	mm (in)	210 (8.27)	210 (8.27)	210 (8.27)	248 (9.76)
  Depth	mm (in)	179 (7.05)	150 (492.15)	150 (492.15)	209 (8.23)
  Possible as base component		No	No	No	No
  Degree of protection		IP00	IP00	IP00	IP00
  Weight, approx.	kg (lb)	16.1 (35.5)	10.7 (23.6)	10.4 (22.9)	24.9 (54.9)
  Suitable for PM230 Power Module degree of protection IP20	Type	6SL3210-1NE24-5UL0 6SL3210-1NE24-5AL0	6SL3210-1NE26-0UL0 6SL3210-1NE26-0AL0	6SL3210-1NE27-5UL0 6SL3210-1NE27-5AL0	6SL3210-1NE28-8UL0 6SL3210-1NE28-8AL0
  Suitable for PM230 Power Module degree of protection IP55/UL Type 12	Type	6SL3223-0DE32-2UA0 6SL3223-0DE32-2AA0	6SL3223-0DE33-0UA0 6SL3223-0DE33-0AA0	6SL3223-0DE33-7UA0 6SL3223-0DE33-7AA0	6SL3223-0DE34-5UA0 6SL3223-0DE34-5AA0
  Rated power of the Power Module	kW (hp)	22 (29.5)	30 (40.2)	37 (49.6)	45 (60.3)
  Rated current Irated of the Power Module	A	45	60	75	90
  Frame size		FSD	FSD	FSE	FSE

  
  
  

  ¹⁾ On the rating plate of the reactor the current is specified according to the duty cycle for high overload (HO). This is lower than the current specified according to the duty cycle for low overload (LO) of the Power Module.

   

  Line voltage 380 ... 480 V 3 AC		Output reactor
  		6SE6400-3TC14-5FD0	6SE6400-3TC15-4FD0	6SE6400-3TC14-5FD0
  Rated current	A	178 1)	178 1)	178 1)
  Power loss	kW	0.47	0.25	0.47
  Connection to the Power Module		Flat connector for M8 cable lug	Flat connector for M8 cable lug	Flat connector for M8 cable lug
  Motor connection		Flat connector for M8 cable lug	Flat connector for M8 cable lug	Flat connector for M8 cable lug
  PE connection		M8 screw	M6 screw	M8 screw
  Cable length, max. between output reactor and motor
  380 V -10 % ... 480 V +10 % 3 AC
  Shielded	m (ft)	200 (656.20)	200 (656.20)	200 (656.20)
  Unshielded	m (ft)	300 (984.30)	300 (984.30)	300 (984.30)
  Dimensions
  Width	mm (in)	350 (13.78)	270 (10.63)	350 (13.78)
  Height	mm (in)	321 (12.64)	248 (9.76)	321 (12.64)
  Depth	mm (in)	288 (11.34)	209 (8.23)	288 (11.34)
  Possible as base component		No	No	No
  Degree of protection		IP00	IP00	IP00
  Weight, approx.	kg (lb)	51.5 (114)	24 (52.9)	51.5 (114)
  Suitable for PM230 Power Module degree of protection IP20	Type	6SL3210-1NE31-1UL0 6SL3210-1NE31-1AL0	6SL3210-1NE31-5UL0 6SL3210-1NE31-5AL0	–
  Suitable for PM230 Power Module degree of protection IP55/UL Type 12	Type	6SL3223-0DE35-5UA0 6SL3223-0DE35-5AA0	6SL3223-0DE37-5UA0 6SL3223-0DE37-5AA0	6SL3223-0DE38-8UA0 6SL3223-0DE38-8AA0
  Rated power of the Power Module	kW (hp)	55 (73.8)	75 (101)	90 (121)
  Rated current Irated of the Power Module	A	110	145	178
  Frame size		FSF	FSF	FSF

  
  
  

  ¹⁾ On the rating plate of the reactor the current is specified according to the duty cycle for high overload (HO). This is lower than the current specified according to the duty cycle for low overload (LO) of the Power Module.