SMC10 Sensor Module Cabinet-Mounted

• Заказные данные
  (1)
• Аксессуары
  (1)
• Информационные материалы

  Информационные материалы

  

  SMC10 Sensor Module Cabinet-Mounted

  The SMC10 Sensor Module Cabinet-Mounted is required to evaluate the encoder signals of motors without a DRIVE‑CLiQ interface. External encoders can also be connected via the SMC10.

  The following encoder signals can be evaluated:

  • 2-pole resolver
  • Multi-pole resolver

  Дизайн

  The SMC10 Sensor Module Cabinet-Mounted features the following connections and interfaces as standard:

  • 1 encoder connection including motor temperature sensing (KTY84‑130, Pt1000 or PTC) via SUB‑D connector
  • 1 DRIVE-CLiQ interface
  • 1 connection for the electronics power supply via the 24 V DC supply connector
  • 1 PE (protective earth) connection

  The status of the SMC10 Sensor Module Cabinet-Mounted is indicated via a multi-color LED.

  The SMC10 Sensor Module Cabinet-Mounted can be snapped onto a TH 35 standard mounting rail according to EN 60715 (IEC 60715).

  The signal cable shield is connected via the encoder system connector and can also be connected to the SMC10 Sensor Module Cabinet-Mounted via a shield connection terminal, e.g. Phoenix Contact type SK8 or Weidmüller type KLBÜ CO 1. The shield connection terminal must not be used as a strain relief mechanism.

  Интеграция

  SMC10 Sensor Modules Cabinet-Mounted communicate with a Control Unit via DRIVE-CLiQ.

  Технические данные

  	SMC10 Sensor Module Cabinet‑Mounted 6SL3055-0AA00-5AA3
  Current requirement, max. at 24 V DC, without taking encoder into account	0.2 A
  Conductor cross-section, max.	2.5 mm2
  Fuse protection, max.	20 A
  Power loss, max.	10 W
  Encoders which can be evaluated	2-pole resolvers Multi-pole resolver
  Excitation voltage, rms	4.1 V
  Excitation frequency	5 ... 16 kHz depending on the current controller clock cycle of the Motor Module or Power Module
  Transformation ratio	0.5
  Encoder frequency, max.	2 kHz (120000 rpm) depending on the number of resolver pole pairs and current controller clock cycle of the Motor Module or Power Module
  Signal subdivision (interpolation), max.	16384 times (14 bits)
  Cable length to encoder, max.	130 m (427 ft)
  PE connection	M4 screw
  Dimensions
  Width	30 mm (1.18 in)
  Height	150 mm (5.91 in)
  Depth	111 mm (4.37 in)
  Weight, approx.	0.45 kg (0.99 lb)
  Certificate of suitability	cULus